HUD-DX1 allows its users to enjoy high-level Hi-Fi sound world by supporting replay of high-quality DSD sound source (2.8/5.6㎒) in native mode using USB bus power alone, DXD sound source (352.8/384㎑), another high-quality sound format, as well as optical input (24bit 192㎑) and MQS (Mastering Quality Sound, 96~192㎑), Hi-Fi sound source, without any loss rendered in studio recording specification. HUD-DX1 also allows its users to enjoy sounds with even higher output and high-quality sound when additionally connecting to the adaptor provided together.
Luxurious Black and Neat White color
You can meet two colors of HUD-DX1. Black color shows luxurious and stable shape
with the assembly of gold volume knob and spike, while white color shows neat and
sophisticated shape with the assembly of silver knob and spike.
DSD Native DSD64/128
Additionally supports playback of 32-bit/384㎑
DXD sound source and optical input
Since HUD-DX1 is designed to support not only the playback of DXD sounds
in 24-bit/352.8㎑ format, but also to support optical input functions that are not
supported by products from other companies. It allows users to convert
a maximum 24-bit/192㎑ PCM digital signal into a high quality analog
sound output and play it back.
ES9018K2M D/A converter
HiFi USB Audio
Playback of Native DSD
Equipped with the newest USB 2.0 high speed audio controller from XMOS and ES9018K2M, a high performance DAC from ESS, it supports playback of Native DSD (DSD64 / DSD128) as it plays back sounds in excellent definition and Hi-Fi audio quality.
Top class OPAMP and high performance headphone amp
Adopting the MUSES series OPAMP, a top class one specifically designed for Hi-Fi audio products by NJRC, HUD-DX1 uses MUSE8920 and TI's LME49720 for its I/V converter and filter circuits for excellent matching in sound quality and optimum constitution that realizes high performance and high fidelity audio with top class sound balance and very low distortion, as well as ultra-low noise. Also equipped with TPA6120A2, a high fidelity headphone amplifier from TI, it easily operates a headphone under 300 Ω in factory default mode and allows users to enjoy sounds with enough volume, even when using a 600 Ω high impedance headphone by removing jumper caps (JP1, JP2) set for headphone output gain.
The high quality analog audio signals generated through the core circuits in the high-end specification and the multiple top class analog audio components are vividly delivered to the speaker and headphone to offer top class Hi-Fi sound environment.
MUSES8920 and LME49720 OPAMP of TI adapted and sound tuned by the top-class capacitor of NICHICON
We secure outstanding stability and high life expectancy to maintain high quality audio output for a long time by adapting MUSES8920 and LME49720 of TI and adapting the highest class UKA Series Aluminum Electrolytic Capacitors of NICHICON on OPAMP power terminal, which plays a core role of analog output terminal and Conductive Polymer Aluminum Solid Electrolytic Capacitors.
Installation of TCXO
TCXO is made of an extremely thin crystal, creating peculiar vibration when applied with electricity. It is often used on resonance circuit to generate uniform frequency of electronic circuits. However, frequency error in which vibration counts of TCXO vary can arise depending on outside temperature, and such appearance can become a main reason for errors or frequency distortions on precision electrical equipments. In order to reduce frequency discrepancies due to exterior temperature, TCXO uniformly maintains interior temperature within crystal oscillator and fixates the frequency, making it an essential component for audio equipments sensitive to frequencies.
Activation of the Protection Circuit
The normal procedure to use the adaptor is make a connection to the USB port after making a connection of the adaptor, but it does not go out of order if this procedure is not followed since a protective circuit is embedded. It is normal to hear a distorted sound temporarily when you connect or disconnect the adaptor during use, since the distorted sound is a phenomena occurring when the protective circuit operates.
Automatic power ON/OFF
To maximize user convenience and power efficiency, the power of this product is designed to be automatically on or off when the computer power is on or off, or when entering or releasing from the power saving mode in the case of using USB power.
LDO Regulator/Inverter circuits
To operate a high performance dual power source type OPAMP, it is required to supply positive and negative voltage at the same time. By supplying both voltages equally to the OPAMP circuit through the high performance inverter circuit after rectifying the power supplied via the USB port or an adaptor through an LDO regulator and low-ESR capacitor to obtain stable power of good quality with no noise, the rich and dense top class analog signals that can be achieved by a hi-end device can be generated.
Protective Circuit for Speakers/Headphones
HUD-DX1 incorporated protective circuit system for the speakers & headphones, preventing any potential damages by temporarily cutting-off loud signals entering the speakers & headphones during the playback, when switching Input Toggle & Off Switch.
Supports USB bus power
This product can be operated under most computing environments using USB power without connecting the adaptor. But the adaptor has to be used when using power from bus power USB hub, laptop, low power computer that have unstable power from the USB port. Make sure to use the adaptor when using an iPad or a smartphone. To use a headphone with high impedance over 150 Ω, you have to use the adaptor to obtain the maximum output.
Convenient Portability Compatibility
Convenient Portability and Compatibility
Typical hi-fi DAC is inconvenient to carry around due to its large size, yet USB DAC has the advantage of being small and lightweight for the purpose of using it connected to the computer. As the unit gets smaller, the function of DAC reaches its limit and sacrifices with low quality audio sound. Our HUD-mx2 has overcome such limit to the maximum, developing ultra lightweight, compact DAC with reduced drop-off in audio quality. You can enjoy the music with highest quality possible audio sound wherever the computer is and, with its plug and play function.
Adopts genuine Thesycon driver
We adopted the driver from Thesycon, a German system software development company, by licensing to offer 100% functionality of high sound quality of Native DSD and stable audio playback. The Thesycon driver can be downloaded from the data center of the AUDINST website. Users can download it to an Internet-capable computer.
Hook-Up Application Connecting to a smart device
HUD-DX1 also supports the connection with smart devices that support USB Audio. Finally, it also maximizes user convenience and power efficiency as it supports automatic power ON/OFF and power saving mode function when used with USB input.
※ Please refer to our website for the method of connecting to a smart device.
① & ② Headphone/Earphone Output (6.35Ø Stereo Phone Jack / 3.5Ø Stereo Mini Jack)
③ Output Selection Switch (briefly “Output Switch”, Output Toggle Switch)
④ Input selection and off switch (briefly “Input switch”, Input toggle & off switch)
⑤ Active Indicator
⑦ Optical IN (S/PDIF Optical Input, Pink Shutter)
⑧ Optical OUT (S/PDIF output, Grey Shutter)
⑨ USB Port
⑩ Power Jack (DC Jack)
⑪ RCA Line Out
Minimum and Recommended System Specifications
• Intel dual-core CPU or better, or equivalent AMD CPU (quad-core CPU recommended)
• 2GB or more system memory (4GB or more recommended)
• Motherboard / laptop equipped with a USB2.0 or USB 3.0 port
• Install OS in a latest type HDD that offers a fast transmission speed (SSD recommended)
• Microsoft Windows 7 / 8 / 8.1 / 10 (64bit recommended)
• Amplifier and speaker or 2 channel active speaker / headphone / earphone
• Receiver amplifier with optical input (Not required. Applicable when using PCM optical output)
To fully utilize the performance of HUD-DX1’s USB audio, the specification of the system such as desktop PC or laptop has to be at a certain level. The level doesn’t have to be high necessarily but should not be too low.
• HUD-DX1 main body
• USB cable (USB A to B Type, 1.5M)
• 4 spikes for fixing (to attach the main body to the floor)
• L-wrench (to attach and detach the volume knob)
• Power adaptor (DC 12V~15V)
※ RCA cable and program/driver installation CD are not provided with the product. The above product content is subject to change for the improvement of the product's functionalities.
※ The driver for Windows can be downloaded from the data center of the AUDINST website. Users can download it to a computer.
Dimensions / Weight
104(mm) x 120(mm) x 34(mm) / 300g
Type : 6.35mm Stereo phone jack / 3.5mm Stereo mini 4-pole jack
Max Out Level : ±10Vpp@600Ω(When removing the gain Jumper)
Max Output Power : 1.5W @ 32Ω
Output Impedance : 2Ω (Load : 16Ω ~ 600Ω)
Type : Unbalanced RCA
Level : ±3.2Vpp max
Impedance : 200Ω
Type : Max 32bit 384㎑, USB 2.0 High-Speed
OS Support : Windows 7 / 8 / 8.1/ 10, Mac OS X Compatible
Operating Voltage : ±12V(with DC Adapter), ±5V(USB Bus Power)
I/V Converter : MUSES8920E (SMD x 2)
Differential Amplifier : LME49720 (DIP)
Line Out : LME49720 (DIP)
Headphone Out : TPA6120A2 (SMD)